fbpx

CAR & SUV SERVICING

MAXIMISE THE LIFESPAN AND VALUE OF YOUR CAR WITH REGULAR CAR SERVICING.

REGULAR SERVICING IS THE BEST WAY TO EXTEND THE LIFESPAN OF YOUR VEHICLE AND ENSURE THAT FAULTS ARE IDENTIFIED BEFORE THEY BECOME SERIOUS ISSUES. WE CARRY OUT SERVICING FOR ALL TYPES OF CARS AND SUV'S TO THE MANUFACTURER’S SPECIFICATIONS, SCHEDULES AND STANDARDS.

Our service technicians are specially trained to carry out vehicle servicing for all makes and models of Car & SUV using the latest electronic diagnostic equipment and all our replacement parts are of original manufacturer standard and come with a 12-month guarantee.

Our car services are up to 40% cheaper than main dealer services.

We offer servicing for most vehicle brands including: BMW, Mercedes, Audi, Volkswagen, Porsche, Land Rover, Range Rover, Lexus, Infiniti, Toyota, Honda, Nissan, Chevrolet, Ford, GMC, Dodge, Chrysler, Hyundai and Kia.

Servicing Packages

INTERIM SERVICE

Designed for the high mileage car user, or vehicles which require frequent checks. We test all the main moving parts that may need attention over a short period of time.

MAJOR SERVICE

Our standard annual service follows the vehicle manufactures service guidelines and is designed to keep your car in perfect working order.

FULL SERVICE

Our most comprehensive car service, covering parts that are recommended for replacement by the vehicle manufacturer every two years.

WHATS INCLUDED
  • Oil Change.
  • Oil Filter Replacement.
  • Check for excessive oil leaks.
  • Check timing belt condition.
  • Check for correct clutch operation.
  • Check for correct gearbox operation.
  • Check and top up clutch fluid if needed.
  • Check drive shaft gaitors for leaks.
  • Check operation and condition lights.
  • Check horn.
  • Check battery condition.
  • Check dashboard warning lights.
  • Check and top up power steering reservoir.
  • Check steering and suspension components for wear.
  • Check steering rack gaitors condition.
  • Check wheel bearings for excessive play.
  • Inspect exhaust system for leaks & damage.
  • Check brake pads for wear.
  • Check brake callipers for leaks.
  • Visually check brake hydraulic system for leaks, damage and corrosion.
  • Check handbrake operation. Lubricate and adjust if required.
  • Check brake discs and drums for wear, cracks and corrosion.
  • Check brake fluid level and top up if required.
  • Check tyre condition and tread depth.
  • Check and adjust tyre pressures.
  • Set wheel nut torque to manufacturer’s settings.
  • Check windscreen wiper condition and operation.
  • Check windscreen washer operation, top up if required.
  • Reset vehicle service light where applicable.
WHATS INCLUDED
  • Oil Change.
  • Oil Filter Replacement.
  • Check for excessive oil leaks.
  • Check timing belt condition.
  • Check radiator condition.
  • Check coolant cap seals.
  • Check coolant hoses for leaks and condition and security.
  • Check electric cooling fan for operation where applicable.
  • Check condition and tension of fan or alternator belt. Adjust or report on condition.
  • Check condition and adjust auxiliary drive belts if required (excluding cambelt)
  • Replace air filter.
  • Report if spark plugs are due to be changed according to mileage.
  • Check and record coolant levels and top up as required.
  • Check fuel cap seal condition.
  • Check visual condition of fuel lines.
  • Check for correct clutch operation.
  • Check for correct gearbox operation.
  • Check and top up clutch fluid where applicable.
  • Check drive shaft gaitors for security and report leaks.
  • Grease prop/shaft if applicable.
  • Check and top up axle and/or transaxle oil if applicable.
  • Top up gearbox fluid where applicable.
  • Check operation of exterior lights.
  • Check horn.
  • Check diesel heater plug indicator operation where fitted.
  • Check battery security and lubricate terminals.
  • Check battery condition and print results.
  • Top up battery/non-sealed units only.
  • Check dashboard warning lights.
  • Visual inspection of HT (high tension) leads.
  • Check and top up power steering reservoir where applicable.
  • Check steering and suspension components for wear and corrosion.
  • Check steering rack gaiters condition.
  • Check wheel bearings for excessive play or roughness.
  • Carry out shock absorber bounce test.
  • Grease steering and suspension where applicable.
  • Visual check for exhaust smoke.
  • Inspect exhaust system for leaks & damage.
  • Check brake pads for wear or damage.
  • Check brake callipers for leaks.
  • Check service brake shoes for wear or damage – clean and adjust if required.
  • Inspect operation of wheel cylinders and report any leaks.
  • Visually check brake hydraulic system, for any leaks, damage and corrosion.
  • Check security of handbrake linkages and travel. Lubricate and adjust if required.
  • Check brake discs and drums for wear, cracks, corrosion or pitting.
  • Check brake fluid level and top up if required.
  • Check brake servo operation.
  • Check tyre condition and tread depth.
  • Check and adjust tyre pressures.
  • Set wheel nut torque to manufacturer’s settings.
  • Check windscreen wiper condition and operation.
  • Check rear wiper condition and operation.
  • Check windscreen washer operations, align jets and top up if required.
  • Check windscreen for chips and cracks.
  • Check mirror condition (interior and exterior).
  • Check number plate condition.
  • Advise if cabin filter is required according to condition.
  • Check seatbelts – front and rear including lap belt.
  • Check operation of all external door locks.
  • Lubricate accessible door hinges.
  • Lubricate bonnet catch.
  • Reset vehicle service light where applicable.
  • Conduct road test.
WHATS INCLUDED
  • Oil Change.
  • Oil Filter Replacement.
  • Check for excessive oil leaks.
  • Check timing belt condition.
  • Check radiator condition.
  • Check coolant cap seals.
  • Check coolant hoses for leaks and condition and security.
  • Check electric cooling fan for operation where applicable.
  • Check condition and tension of fan or alternator belt. Adjust or report on condition.
  • Check condition and adjust auxiliary drive belts if required (excluding cambelt)
  • Replace air filter.
  • Drain out cooling system and replace coolant to correct specification.
  • Replace spark plugs.
  • Check fuel cap seal condition.
  • Check visual condition of fuel lines.
  • Replace fuel filter.
  • Check for correct clutch operation.
  • Check for correct gearbox operation.
  • Check and top up clutch fluid where applicable.
  • Check drive shaft gaitors for security and report leaks.
  • Grease prop/shaft if applicable.
  • Check and top up axle and/or transaxle oil if applicable.
  • Top up gearbox fluid where applicable.
  • Check operation of exterior lights.
  • Check horn.
  • Check diesel heater plug indicator operation where fitted.
  • Check battery security and lubricate terminals.
  • Check battery condition and print results.
  • Top up battery/non-sealed units only.
  • Check dashboard warning lights.
  • Visual inspection of HT (high tension) leads.
  • Test effectiveness of starter motor.
  • Test alternator charging rate.
  • Check and top up power steering reservoir where applicable.
  • Check steering and suspension components for wear and corrosion.
  • Check steering rack gaiters condition.
  • Check wheel bearings for excessive play or roughness.
  • Carry out shock absorber bounce test.
  • Grease steering and suspension where applicable.
  • Visual check for exhaust smoke.
  • Inspect exhaust system for leaks & damage.
  • Check brake pads for wear or damage.
  • Check brake callipers for leaks.
  • Check service brake shoes for wear or damage – clean and adjust if required.
  • Inspect operation of wheel cylinders and report any leaks.
  • Visually check brake hydraulic system, for any leaks, damage and corrosion.
  • Check security of handbrake linkages and travel. Lubricate and adjust if required.
  • Check brake discs and drums for wear, cracks, corrosion or pitting.
  • Check brake fluid level and top up if required.
  • Check brake servo operation.
  • Replace brake fluid and bleed system.
  • Check tyre condition and tread depth.
  • Check and adjust tyre pressures.
  • Set wheel nut torque to manufacturer’s settings.
  • Check windscreen wiper condition and operation.
  • Check rear wiper condition and operation.
  • Check windscreen washer operations, align jets and top up if required.
  • Check windscreen for chips and cracks.
  • Check mirror condition (interior and exterior).
  • Check number plate condition.
  • Advise if cabin filter is required according to condition.
  • Check seatbelts – front and rear including lap belt.
  • Check operation of all external door locks.
  • Lubricate accessible door hinges.
  • Lubricate bonnet catch.
  • Reset vehicle service light where applicable.
  • Conduct road test.